IEC60601-Clause 9.8.3.3 For Dynamic Loading Force Tests From Human Weight
![]() |
...-2-52 Appendix CC.2.2 Impact test of mattress support table. According to IEC60601 section 9.4.2.3 Instability. According to IEC60601 section 9.8.3.3 human body test mass. 2 IEC60601 section 9.8.3.3 2.1) Extension mode: motor drive 2.2) Impact height: 0...
KingPo Technology Development Limited
|
Dynamic Fatigue Furniture Testing Machines For Foam Constant Force Pounding Testing
![]() |
Dynamic Fatigue Furniture Testing Machines For Foam Constant Force Pounding Testing MAIN FUNCTIONS: Durability test: put a square sample into the lower platform of the tester, with a compression plate area smaller than the sample pressure repeatedly concave into the sample, so that each cycle to achieve the maximum load......
Dongguan Haida Equipment Co.,LTD
|
Electronics Insertion Force Test Machine
![]() |
...dynamic impedance (mΩ); solutions to the test fixture connector problems, and testing the male and female connectors can be automatically aligned, there will be no unilateral problems. Testing system with dynamic impedance, insertion force can be tested simultaneously in the test and the mapping of the dynamic impedance "load......
jinan hardness STING EQUIPMENT CO., LTD
|
Load Cell IPW2D 72kg C3 Dynamic Weighing force sensor Single Point weight sensor 2mv/v for Digital Scale Aluminum IP67
![]() |
... C3 with OIML-R60 test report − Max. capacities: 7.2 kg ... 72 kg − Off center load compensated(OIML R76) − Degree of protection IP67(according to EN 60 529) − Shielded connection cable − optimized for dynamic weighing applications Optional: −...
Innovation Electronic Co.,Ltd
|
Stainless Steel Toys Testing Equipment for Determination , Dynamic Strength 50kg Test Load
![]() |
... strength. Test load for scooters intended for children with a body mass of between 20 kg and 50kg. Specification Part weight(Kg) diameter(mm) height(mm) a 10.42 150±2 75±2 b 14.58 178±2 75±2 c 4.16 d 2.00 e 0.50 Testing Standards EN71, ISO8124-1...
SKYLINE INSTRUMENTS CO.,LTD
|
Vehicle Inspection Equipment Roller Brake Tester 4T Roller Brake Opposite Force Tester With Axle Load Brake Testing
![]() |
...force tester Roller Brake tester with axle load brake testing Product Introduction: Its main for the brake performance testing. The roller brake tester can detect and calculation the each axis (left and right wheels) block force of car, brake force and the deviation of brake force (process deviation, and maximum deviation), as well as the ratio of brake force and axis load......
Cartesy Diagnosis Technology CO.,Ltd
|
Load Accuracy ±0.5% Pressure Rebound Force Testing Machine For Switch Keyboard Button
![]() |
Load Accuracy ±0.5% Pressure Rebound Force Testing Machine for Switch Keyboard Button Model:IF6001A Purpose: This tester is used for pressing force test and rebounding force test of keyboard buttons, and the keystrokes, buttons of all kinds of electronic products. Adopt high precision load cell and drive by servo motor, can get accurate force testing data. Application: Rubber key force test Spring & key force test......
Infinity Machine International Inc.
|
DC motor 25~40W Analogue Display Universal Tensile Testing Machines Max 100 Load Strength Testing Machine
![]() |
... Machine is applicable to testing tensile strength, elongation, compression strength, bending resistance, tearing force, peeling force, adhesive force and shearing force for specimen, semi-produce and material. Minimum test precision test: 20 g / 25 mm, to...
GUANGDONG KEJIAN INSTRUMENT CO.,LTD
|
Manual Operation ABL Peel-off Force Test Stand for Force Gauge with Max Loading Capacity 500N
![]() |
...Force Test Stand for Force Gauge with Max Loading Capacity 500N Technical Data Download: iqualitrol Force Test Stand Function: iqualitrol ABL Peel-off Force Test Stand is specially designed for NK, HF series Push pull equipment,can be combined into the test machine with different uses.Specially used in PC board on foil circuit adhesion force......
Dongguan Quality Control Technology Co., Ltd.
|
Adhesion Holding Force Testing Machine Adhesive Tape Multi - Position Tester
![]() |
... is to do the static load test for the adhesion force of the adhesive tape, under certain load automatic timing adhesive tape can holding time to confirm the timeliness of adhesive tape. Testing Machine For Adhesive Tape is used to assess the durability of...
Perfect International Instruments Co., Ltd
|