CAFS1000B fast response time (20 ms response time), wide flow rate range 0-60 m/s

Product Description

CAFS1000B series MEMS air flow sensors (air flowmeters) are used in modern automotive electronic control Fuel injection (EFI) and are typically installed on the intake port between the air filter and the throttle body, it is used to measure the amount of air in the intake engine, and its output signal is used as the main parameter to control the amount of fuel injection in the electronic fuel injection system of the automobile engine, the indexes of power, economy and emission performance of the engine are determined. In order to obtain the mixture of fuel concentration in all operating conditions of EFI engine, it is necessary to measure the amount of air inhaled into the engine at every instant, which is the main basis for calculating and controlling the fuel injection amount by electronic control unit. Therefore, automotive air flow sensor in modern vehicles to save energy consumption and control emissions of pollutants play a very important role. CAFS1000B series products have been used in automobile and related industries for many years, and can meet the requirements of high reliability, high stability, high precision and low cost. The product application promotion will be very broad. Characteristics 1. High precision (± 2.0% F. S precision)2, linear output and no temperature compensation 3, long-term stability with small zero drift 4, fast response time (20 ms response time)5, wide flow rate range 0-60 m/s, strong shock resistance 100g6, solid state sensing core (no surface cavity or fragile film) , anti-clogging and pressure shock 7, output mode: analog voltage output (1-5v) , frequency output (2.05-11.69 khz) , two options 8, reliability, can adapt to the relative humidity gas measurement 9, working temperature: -40 ° C to 125 ° C, storage temperature: -40 ° C to 125 ° C, Humidity: 0 ~ 100% RH10, the sensor can withstand condensate.

Structural Design

The flow microsensor is located within a specific flow channel and forms a flow module that can be inserted into the air filter and placed
Intake pipe section. Depending on the air flow rate, the same type of air filter can be used, and the flow sensor uses a hybrid circuit to accurately measure Changes in airflow.

Core-pulling module
1. Measuring channel capping
2. Upper cover
3. Sensor processing circuit
4. Circuit substrate
5. Core pulling

Air Flow Meter Overall:
1. Core-pulling module
2. DC direction
3. Air filter

China

Wuxi Consensic Electronic Technology Co., Ltd

Room 214072, B5401, No. 86 Dicui Road, Binhu District, Wuxi City, Jiangsu Province

Phone:+86 510.85122279

Fax:+86 510.85122259

SO FAR