PTM300 portable syngas analyzer
OVERVIEW
PTM300 is a portable syngas analyzer based on NDIR, TCD, and
electrochemical technology, it can simultaneously measure CO, CO2,
CH4, H2, O2, CnHm, C2H2, C2H4, or any of their combination and
calculate heat value.
FEATURES
- Replacement to gas chromatography, mass spectrometry.
- Patented NDIR and TCD technology, including ECD technology for
reliable measurement of eight gases.
- High-selectivity CH4 gas sensor, no interference from other
hydrocarbons.
- Fully compensated H2 sensor, no interference from CO, CO2, CH4
based on the intelligent correction.
- Built-in sample pump, flow meter filters, and battery for portable
operation
- Internal data record and RS232 COM port for data output.
- Modular sensor design, easy maintenance.
SPECIFICATION
Gas | CO/CO2/CH4/H2/O2/C2H2/C2H4/CnHm*/calorific value calculation |
Measurment Principle | CO/CO2/CH4/C2H2/C2H4/CnHm:NDIR; |
H2:TCD |
O2:ECD |
Measurment Range | CO/CO2/CH4/H2:(0~100)%O2:(0~25)%; |
C2H2/C2H4/CnHm:(0~10)%(optional) |
Accuracy | CO/CO2/CH4/C2H2/C2H4/CnHm:±1%F.S.; |
O2/H2:±2%F.S. |
Resolution | 0.01% |
Repeatability | ≤1% |
Response time | T90<15s (NDIR) |
Optimal flow Rate | (0.7~1.2) L/min |
Inlet Gas Pressure | (2~50) kPa |
Gas Condition | No Tar, No Dust and No Water |
Communication | RS-485/RS-232 |
Power Supply | Internal rechargeable Li-ion battery, External 12.6V charger |
Display | LCD Display |
APPLICATION
All the cases which require the fixed installation, and online
detection of gas concentrations such as Chemical Industry, Power
Generation Plants, Natural Gas Pipeline & Processing, Pulp & Paper
Industry, Waste Water Treatment Plants, Commercial & Industrial
HVAC, Acetylene Gas Bottlers & Users, Ice Skating & Hockey Arenas,
Cannabis & Hemp Oil, Breweries and so on.

FAQ
Q: When do you reply to messages?
A: We will reply to you with your inquiry in 24 hours.
Q: When do you send the products? And how do you send it?
A: For the small order, we will send out the goods within 5 days,
If have stock, we will send it immediately.
We send them by ups, FedEx, TNT, or DHL. For big order, normal is
20 days will finish.
Q: Do you accept OEM or revised logo, color, model, size?
A: Yes, we accept OEM for the qualified buyer. We can make the
products according to customer personal requirements.
Q: How about the quality of the management?
A: We have a complete quality control system, all of our products
will be fully pre-inspection by QC departments before,
shipping to you. We have the certification of ISO, CE we could send
the certification test of our company to you.
Q: How about your after-sale service?
A: After sending, we will track the products for you, until you get
the products.
When you got the goods, test them, and give me feedback.
If you have any questions about the problem, contact us, we will
offer the solve way for you.